Subscribe to Blog
Email Address
 

Out Company used to have somebody else plasmacut cutting anvils for us.
This was expensive, plus heat generated by plasma caused already unstable anvils to warp like crazy making them very hard to grind flat.

So when foreman told me to machine one on CNC i immidately asked him to buy one of those nifty Hanita TiALN coated Varimill cutters.
Too bad they are too expensive. So the company bought same style of cutters made by Niagara. 0.5" end mill there is x3 cheaper than hanita's. Plus i believe cutting tools made to the same specs, out of the same materials are performing identical.

The machine we ve been using for this is really shaky and busted, so dont laugh at speeds and feeds that we came up with.

So basically, Specs Are:

  • Material: Hardox pre-hardened steel Rc 45-50
  • Cutter: 4 Flute, Stagger Flute TiALN coted 0.5" Micrograin Carbide End Mill, 2.5" Overall, 0.625" Flute Length, 1" overhang
  • Operation: Slotting
  • Speed: 1200 RPM
  • Feed: 4.8 IPM
  • Depth OF Cut: 0.125"
  • Plunge method: 2.5 Deg Ramp/Helix, Or Plunge into 0.281Dia pilot hole at 3 IPM
  • Coolant: Airblast + Oil

Comments:
No Comments posted yet, be the first one!

New Comment to: Milling Hardox Steel Rc 45-50

Name: *
Solve Capcha:
*
Sing In

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here