Look for the HSM machining of the round central pocket in the beginning.
Here we have a 12mm 6 flute Coated hi-performance endmill, cutting 1" deep at 0.047" (10%) rWOC.
at 10000 RPM and 300 ipm feedrate. the chipload works out to be 0.005". Material is 4140 pre-hardened steel.

Impressive isn't it?
Those results have been achieved with uber-expensive BlueSwarf tap-test technology.

This is one video that caught the eye of one of my HSMAdvisor trial users:

Being a geek and wanting to help the user make the right decision I immediately punched the numbers into my HSMAdvisor app.

Here is what I've got:

Here are some Okuma Captain 1200 program samples for work with live tooling.
Samples are quite big so READ full article

Cycle Format:

G184 X Z C K (I) F Q E
OR
G184 X (Z) R C K (I) F Q E

G180 (Cancel)

G71 X Z A|I B D U H L E F J M Q

• D=First Depth of Cut
• U=Finish Depth of Cut
• J=Number of threads at F
• X=Target Depth (minor Dia of theread)
• Z=Coord of end Point
• A= Angle of thread
• B= Tool Cut angle
• H= Difference between major and minor dia of the thread
• M= Cut pattern
• M32= Longitudal
• Q= Number of leads

Note: Feed mode must be in G95(IPR)

Here is a list of Okuma G and M codes i got from the manual

Note Some codes may not be supported by your machine, all information is given as is and i dont give a ... if you break something.

Information given here is correct to the best of my knowlege

If you want OKUMA Lathe to repeat program several times you can use a subprogram or a conditional GOTO statement.

On Many Okumas subprograms is an option you have to buy, so we have to use GOTO statement.

Thats it 

This little code helps alot when using bar feeder and stuff like that.