Subscribe to Blog
Email Address
 
Search for canned returned 1 results.
Pages:(1) [1]

Lessson 3: CNC Canned Cycles, Drilling, Tapping, Reaming and Boring Cycles

September 20, 2015, 2:49 pm by Eldar Gerfanov (Admin)

Canned cycles are used every time we need to drill, ream or tap holes on our CNC machine

Standard Fanuc G-Code language supports more than a dozen canned cycles.

The most common cycles that will cover 99.9% of your g-Code CNC programming work are:

G-Code Name Motion Style
G81 Standard Drilling Feed-In, Rapid-Out
G83 Deep Hole Peck Drilling Incremental Feed-In by Peck Distance, Rapid Out, Repeat
G84 Right Hand Tapping Feed-In,Reverse Spindle, Feed-Out
G85 Reaming/Boring Feed-In, Feed Out

Subsequent holes

You can drill additional holes After your canned cycle has been initiated.
Any line with X Y position will be treated as another hole position.

Each position can have its own Retract value, feed rate and retract height modifier.

G80 - Canned Cycle Cancel Code

After all the holes of the canned cycle have been drilled, it is required to call G80 code in order to cancel the current cycle.

Read More 
Pages:(1) [1]
Sing In

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here