avatar

By pkv13

January 20, 2023, 6:54 am

Add tool

Моля, добавете индексиран инструмент за рязане на бутони с кръгли плочи към библиотеката. А също и инструмент за високо подаване с ъглови зъби. Те се използват много често. Надявам се на вашето разбиране. Благодаря !

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

January 24, 2023, 11:00 am

Здравейте,
Използвам Google Translate, за да чета и пиша на неанглийски езици, така че прости ми, ако нещо не е наред.
HSMADVISOR поддържа резачките за бутони с кръгли вложки и крайни мелници с високо хранене.
Моля, проверете екраните по -долу.
Моля, обърнете внимание и за двата типа инструменти дължината на флейтата е максималната препоръчителна дълбочина на рязане според вашия производител на инструменти.
Също така за крайната мелница с високо хранене е важно да настроите правилния ъгъл на олово според вашия действителен инструмент.
В близко бъдеще ще добавя специален край на лицето с кръгли вложки.

Hello,
I am using google translate to read and write in non-English languages, so forgive me if something is wrong.
HSMAdvisor supports the button cutters with round inserts and high-feed endmills.
Please check the screenshots below.
Please note for both tool types the flute length is the maximum recommended depth of cut according to your tool manufacturer.
Also for a high-feed endmill, it is important to set up the correct lead angle according to your actual tool.
I will be adding a dedicated face endmill with round inserts in the near future.

Button Cutter.PNG Button Cutter.PNG High Feed End mill.PNG High Feed End mill.PNG

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here