avatar

By jmcd1026

August 28, 2017, 2:46 pm

Grob twin spindle 5 axis

Is there a way I can import a Grob G520 twin spindle 5 axis machine? I'm trying to set up the machine database, but this machine is not on the drop down list.

Thanks,
Jason

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

August 28, 2017, 3:33 pm

Hi,

I will look into it today.
To make my job easier, could you send me more info on the particular configuration you have and a Power curve if you have one.

Best regards.

avatar

jmcd1026

August 29, 2017, 2:12 pm
Updated by: Eldar Gerfanov (Admin)August 29, 2017, 2:15 pm
avatar

Eldar Gerfanov (Admin)

August 29, 2017, 2:15 pm

Thank's. I will check it out.

avatar

jmcd1026

August 29, 2017, 2:30 pm

Thanks Eldar!!

Jason

avatar

Eldar Gerfanov (Admin)

August 30, 2017, 1:57 pm
Updated by: Eldar Gerfanov (Admin)August 30, 2017, 1:59 pm

Hi Jason,

You can use Download button on machine profiles dialog to download the GROB machine with the spindle option that you have.

I do no know which spindle option you have (i guess you will still have to figure it out), so i added ALL spindle types offered by GROB.

I set 77% warning level for all machines to represent the continuous load curve that they listed. At 100% that would be the peak load curve.

Regards!

avatar

jmcd1026

August 31, 2017, 7:04 am

Thanks Eldar!!!

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here