Latest Responses
Login:
Password:
avatar

By serge.nelissen

December 2, 2018, 3:18 pm

WOC and DOC

Hi Eldar,

My tool catalogue often mentions max WOC and DOC. max WOC like 0.1 diam and max DOC like 1.5 diam. I see no possibility to enter this in HSMAdvisor. Am I wrong?

Serge

Answers:

Pages:(1) [1]
avatar

Eldar Gerfanov

December 2, 2018, 7:41 pm

Hi,

You can use the Performance Slider to adjust the recommend Engagement value.
Performance setting is also saved with the tool record.

There is no separate "max" WOC or DOC setting.

Regards.

avatar

serge.nelissen

December 3, 2018, 1:51 pm

Quote:"ELDAR GERFANOV"
Performance setting is also saved with the tool record.


That explains why the default I set to 70% didn't seem to work. I think saving it with the tool isn't correct, this setting is about a cut not a tool. Maybe you implemented this upon demand. In that case make it configurable please.

Serge

avatar

Eldar Gerfanov

December 3, 2018, 3:27 pm
Updated by: Eldar GerfanovDecember 11, 2018, 1:04 pm

Hi,

Please make sure you are running the latest version. I have made a lot of changes in yesterday's release.

Defaults are only applied when you change the tool type (or click Reset) and only when no tool/cut is loaded.

Speed and Feed Adjustments and Limits are saved both in the Tool and the Cut separately.
The CUT is taking the precedence. So It will overwrite whatever is set in the tool.

This is the intended functionality.

Best regards.

avatar

serge.nelissen

December 3, 2018, 6:19 pm

Quote:
There is no separate "max" WOC or DOC setting.


Could you implement it? If not, can you show the tool comment in the tool data view?

And again… I don't agree you store values from the 'Cut Data' view to the tool. It is confusing.

Installed the new version… some typos not corrected yet.

Serge

Answers:

cant leave messages here

© 2009-2018 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here