avatar

By ozwes007

June 2, 2017, 3:33 am

Boring Bar Calcs

Just a small request on the boring bar calculations.
When the length of the boring bar overhang is more then 3-4 times its diameter, the general rule i was taught over thirty odd years ago was to decrease the speed by a factor of at least 2 if not more. this was to reduce chatter as increasing feed only makes it worse.I find that the calcs in the program are terribly wrong in this regard. And try as you might, they are always wrong at an overhang above 4 times the bar dia.

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

June 2, 2017, 3:54 pm

Hi,

Which program are you talking about. The FSWIZARD or HSMAdvisor?

Thanks.

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here