By serge.nelissen
Torque and force
Hi,
The tech specs don't mention anything about torque or force. I only know the power (3 HP).
It's aPrototrak KMX machine (kind of Bridgeport).
Any idea what the other values could be?
Thank you,
Serge
Eldar Gerfanov (Admin)
Hi,
How is spindle speed controlled ? With belts/gears or with VFD or some other electronic speed controller?
Depending on that you can re-use one of the existing machine definitions.
I would need possible RPM ranges if you need help creating machine profile.
serge.nelissen
Hi Eldar,
Belt driven. RPM ranges from 60-500 and 500-4200, and in my opinion the motor always turns at the same speed.
Thank you,
Serge
Eldar Gerfanov (Admin)
Hi,
Based on your description I added the Prototrak machine to the cloud.
Click on the Download button in the Machine Profile dialog to add it.
Best regards.
serge.nelissen
Thank you Eldar!
serge.nelissen
No Max cutting force?
Max feed is 100 inch / min
In the power curve, 500 RPM occurs twice.
Eldar Gerfanov (Admin)
Max feed is 100 inch / min
In the power curve, 500 RPM occurs twice.
RPM repeating twice is not an issue as long as it is in proper order
serge.nelissen
Sorry I insist, but have you any idea about the cutting force? I have no clue :-(
serge.nelissen
I did and uploaded the machine to the cloud ;-)