avatar

By Morten

May 10, 2020, 1:31 pm

To low Feed

Hi

Fswizard, great software.... But.

I have a rule of thumb, newer go lower than fn 0.05mm feed for a fhm end mill.

When I calc matr. a36 44w (St 52-3)

Fhm ΓΈ16mm cutter tiAIN z=4

Doc 18mm woc 12mm

Result is speed 175 m/min that's pretty good.

.But then it's say fz 0.037mm

That's mutch to low p.t. We are running with 0.09mm.

The supplyer calc. Toolscout say 0.075mm

What is going on?

Thank you Morten Lerager

Screenshot_20200510_202943_com.beta.fswizard_lite.jpg Screenshot_20200510_202943_com.beta.fswizard_lite.jpg

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

May 10, 2020, 10:37 pm

Hello,

It looks like you are running a so-called High Performance end mill. It differs from Generic End Mills in that it is material specific (for example steel only) and can be used for heavy roughing operations.

So in such case simply pick the HP/Roughing End Mill tool type (see screenshot).

You can see that the suggested feed is almost for that tool type 0.09mm which is miraculously close to your go-to parameter ;)

16mm HP Endmill Screenshot_2020-05-10-23-31-17.png
avatar

Morten

May 11, 2020, 1:47 am

Hi Eldar

Ohh, I miss that.

I gess there was only on type of End Mill :)

Yes i use Hoffman Group HOLEX Pro Steel 203054 16

witch is as you say a rouff cutter



Thank you very much

https://www.youtube.com/channel/UC4d6Ml2kbsoUyupjs7ZTENQ

https://www.linkedin.com/in/morten-lerager-980a72102/

Holex.JPG Holex.JPG

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here