avatar

By Gmack

January 21, 2020, 2:08 pm

Chipload, reference chipload, and chip thickness

Are there "standard" definitions for chipload, reference chipload, and chip thickness? How do they differ?

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

January 22, 2020, 9:45 am

Hi,

There is no "standard definition" any where. I guess i should create a help article for that.

Chipload - Advancement of the cutter per tooth per revolution.
Reference chipload - the initial chip load that was pulled from the data base before adjustments.
Chip Thickness - the actual measurable thickness of the chip.

You may find this article useful: https://zero-divide.net/?&article_id=4413

Regards.

avatar

Gmack

January 22, 2020, 3:08 pm

Thanks!
Do tool manufacturers use the same definition of Chip Load (one solely dependent on feed rate, spindle speed, and number of cutter flutes) for their speeds and feeds recommendations? Is that the most commonly accepted definiton?

I understand chip thickness, but not "Reference Chipload"

avatar

Eldar Gerfanov (Admin)

January 22, 2020, 3:50 pm

Yes,

Manufacturers definition of chip load is the same.

"Reference chip load" = Manufacturer Chip load before applying different compensations.

IE: most manufacturers suggest 0.0025ipt. that is showing up within the app as Reference Chip Load.
Then HSMAdvisor does its magic and determine that the tool can feed much faster and recommends the Chip Load = 0.005".

This is why you often see different Reference Chip Load different from the resulting Chip Load

avatar

Gmack

January 22, 2020, 5:01 pm

Got it - thanks!

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here