avatar

By MarcusWolschon

November 7, 2017, 11:47 am

Effective Diameter for pre-drilled holes


Hello,

with tools of type "Jobber Twist Drill",
1. I center-drill a hole
=> "Effective Diameter" is the maximum diameter my spot-drill is inserted.
So I proably use a 4mm spot-drill and insert it just so it barely reaches the full 4mm.

2. Then I drill the hole all the way through with a 4mm drill.
=> "Effective Diameter" is the "Nominal diameter" of 4mm.

3. Then I widen that hole using a 6mm drill.
Cutting 6mm directly seems to be above the torque limit of my machine at my minimum rpm of 8000 (700W, max 27600rpm).

4. Then the hole gets widened to 6.6mm (clearance of a coarse M6 thread) using a regular milling operations.
Simply because I don't have collets or drills for 6.6mm.

In step 3,
What would I enter now as the equivalent of a Width Of Cut is less then the nominal diameter of 6mm
because the center 4mm are already nothing but air?

I'm not a machinist but a software developer doing this in his free time.
So it may be that there is a good reason not do pre-drill with 4mm in the first place and thus this question itself should not come up.
However it seems to be a sensible choice to be careful when trying my hands at drilling on a CNC for the very first time.

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

November 7, 2017, 1:12 pm

Hmm

That's a good question.
I never had to pre-drill for the sake of avoiding stalling spindle with a larger drill bit...

And when I open a pre-drilled hole I would still calculate as if stock was solid.

Machines I used to work on had ample power.

So there is currently no way to calculate torque on drilling a pre-drilled hole.

I would recommend creating a copy of your machine with twice the 'virtual' power and torque. Just to calculate for stuff like this.

I am going to add "Pilot Hole" parameter in the next update or so.

Thanks!

avatar

Eldar Gerfanov (Admin)

November 13, 2017, 10:44 pm

Good news.

In the latest update I added the Pilot Hole input field to drilling tool types.
It will now account for pilot hole when calculating power requirements.

Regards.

avatar

MarcusWolschon

November 14, 2017, 12:54 am

Great!
I didn't expect this to happen anytime soon.
Thanks a lot!

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here