A few days ago a HSMAdvisor user asked for Hardness conversion chart to be added to our great product.

So. Here we go:

It is accessible on Reference tab.

This chart is now available in update v1.405 at the old address: http://hsmadvisor.com/?page=HSMAdvisor

Why i am stressing the location is because some file hosting websites are hosting something that claims to be genuine HSMAdvisor software without first asking for my permission.

Please always download our software from hsmadvisor.com website.

Our software is also signed with my name.
So you can be sure it comes from me directly and is not tainted by malicious code.

Also in this update i added Acrylic to the materials list.

Regards!

I have been several times asked to add a right-angle triangle to the Geometry calculators list.

And every time i dismissed the idea because there is already an oblique triangle calculator, which works exactly like a right-angle if you set one angle to 90 degrees.

Basically i was being lazy to add it because i felt like users of my software should not be so lazy and use the Oblique triangle calc instead...

Finally someone asked for the Right Triangle in the new Suggestions form (the blue balloon on the bottom task bar) and having no way to contact the author (suggestions are anonymous) i have decided to finally implement the damn calculator!

So. Enjoy, guys!

Also in this update I fixed one glitch with the S&F Calculator as well.

You can download the update over here: http://hsmadvisor.com/

This update fixes the no-message shutdown when your trial expires!

There had not been any updates to HSMAdvisor for several months now.
And there is a very good reason for that.

We have been working hard on a lot of new super-cool features and improving the old functionality.

BTW: This Update Resets the Trial Counter!

Let us cut to the chase.
Here is a list of all the latest changes and improvements:

• New Cut Cloud controls added (beta only!)
• New Cast Aluminum materials
• New combined Tool Torque and Deflection Limit controls
• New and Improved Tool Display Graphics. Now for Turning too!
• Lathe Tools now consider Shank size when suggesting chip-load.
• New Mass Edit - > Set SFM/Feed Overrides command in the Tool Database
• Improved Tool Deflection calculations
• Improved and refined a lot of behind-the-scenes stuff

I am going to explain the most important improvements below.

HSMAdvisor the Hook for MasterCAM x9 has had massive changes since the last update

• Completely redone Operation Import/Export functionality
• Added "Insert Operation" command (Add it to MasterCam toolbar through Customize->Toolbars->HSMADVISOR->select item,select toolbar-> Add..)
• Reworked MC Toolbar Icons
• Better tool Recognition
• Added support for ALL milling (2d, 3d, HST) operations. 
• Fixed a huge number of problems including those with coolant, tool numbers and some unsupported operations.

HSMAdvisor hook for MasterCAM currently supports only MC x9.

Due to large amount of work I have done on x9 hook I decided to not port it to support x8. I simply have no time resources to do so. I only have one life you know!

Later versions of MasterCAM will, however, be fully supported.

Every month we are getting a good amount of feedback and suggestions.

Everything is getting prioritized and eventually implemented. Urgent stuff is getting done fast. And other "nice to haves" are getting pushed down according to their usefulness / difficulty (yes, everyone secretly wishes my program could also edit and create HSM g-code :)).

It is amazing, but almost half of HSMAdvisor's features were originally suggested by our loyal users!

The latest update HSMAdvisor 1.213 addresses some of the feedback I have received last couple of months.

So the New features are:

1. Smart Depth and Width of Cut (DOC/WOC) suggestion (user suggested)
2. Compressing of Shared Tool DataBases
3. Display of Stock status on Tool DataBase tables (user suggested)
4. Various little improvements like new Heli-Coil reference, better DOC/WOC calculation better multitasking, etc. (mostly based on user feedback)

Let's go over the most important ones here:

This Update Resets Trials for All Unlicensed Users!

What's New

• New Workpiece Materials
• Added Open Tool DataBase option to myCut DB "Actions" menu
• New and updated myCut DB tool/cut list.
• Ability to choose visible columns on myCut DB tool/cut list (Right mouse click on headers area)

What's Improved

• Occasional errors fixed

First of all Merry Christmas and a Happy New Year !

There has been a spur in development in the last couple of weeks.
Mainly due to the fact that i took a vacation from my day job.

I also used this time to pay a visit to some businesses operating in the area to get some feedback on my software, hear out their needs and desires.

I have not been able to post about the latest updates, so let's summarize what we have at this moment in the latest v1.110 update

• New 90 Degree metric Flat Head screw reference tool
  
• Ability to use comma sign instead of dot as a decimal point.
  HSMAdvisor will still convert comma to dot, but now it treats input properly
  This was done to accommodate users whose language settings use comma on their numpad
• Fixed scaling for all DPI types.
• Added a bunch of materials like Machinable Wax, Plywood, some Steels etc.
• Improved and made more predictable loading of tools and cuts from the database
• Made improvements to Machine definition window.

Most of the work has been finished on the CAM integration feature.
If any of you, my users, feel like you want the FREE integration with their favorite CAM, please nag your CAM support and/or sales desk!!

........

........

Now did I mention I plan on NOT changing a dime for the integration feature?

If not, then let me repeat it again.

CAM Integration feature will come at no price for my users!

So if i were you, i would file support tickets (make some phone calls, write letters) to your CAM providers and ask them to consider enabling their software to speak with mine.

My contact details can be found here: http://hsmadvisor.com/index.php?page=help&shell_id=241&article_id=4426

Have a nice New Year!