As you know the long-awaited standalone version of FSWizard is being prepared for the release right now.

I am changing the name it is going to be marketed under.

Down the line The product is going to consist of many modules.
And in order to give it a name that would encompass a wide variety of tools under one umbrella it has been decided to change the name of the solution to HSMAdvisor

A new website is being constructed right now around new product

It is going to be located at HSMAdvisor.com

But we are not forgetting where we came from.

FSWizard is becomming one module inside HSMAdvisor solution.
So you will still see FSWiz name popping up here and there.

Also as i said earlyer and robably against better judgement i will keep HSMAdvisor(FSWizard):Online Calulator you have come to love and depend on free for everyone to use.

Speeds and Feeds by HSMAdvisor (FSWizard)
Material: A-36 Hot Roll Steel 160-220 HB
Tool: 0.500in 4FL Carbide TiAlN coated Solid HP End Mill (WIDIA Metal Removal Maestro)
1" Stickout, 0.625 Flute Length
Speed: 528.0 SFM/ 4035.7 RPM
Feed: 0.0028 ipt/ 0.0114 ipr/ 46.00 ipm
Chip Thickness: 0.0028 in
Engagement:  DOC=0.250 in   WOC=0.500 in

Optimizing Peck Drilling for Deep Holes

Peck drilling is often necessary when machining deep holes. However, with the correct feed and speed settings, pecking is unnecessary for depths up to:

• 3× diameter for standard drills
• 5× diameter for high-performance parabolic drills

For deeper holes:

• Up to 10× diameter → Up to 5 pecks for regular drills, and up to 3 pecks for parabolic drills
• Beyond 10× diameter → Constant pecking is required:
  • 0.5–1× diameter per peck for regular drills
  • 1.5–2× diameter per peck for parabolic drills

Since programming requires specifying a peck amount, here are the recommended values: