avatar

By glennd

February 14, 2017, 7:30 pm

Need to be able to adjust the SFPM

Hi Eldar,

I like your software.

One thing Id like to see would be, for the software to have the ability
to be able to edit any one of the Materials.

When editing the Materials, Id like the ability to increase or Decrease any SFPMS or Feeds or Both
at the Same time. A percentage etc.

For example If I were able to Edit the P20 Material, Id like to increase the SFPM by 10% or 20% and then
save that as a New Material. That way I wouldn't overwrite your Default Material settings etc.

This way I could Create a P20 Material with a BRINELL of 250 or Create one with a Brinell of 350 Etc.

Thanks Glenn

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

February 15, 2017, 1:00 am

Hello,

I know this is not what you were asking for.
But You can create custom tool famililies and specify SFM and chipload for them.

Please check out this article:
http://zero-divide.net/?shell_id=151&article_id=4592_manufacturer-recommended-speeds-and-feeds-in-hsmadvisor

I am preparing a big update to this functionality that will make it easier to use.

As to custom materials.
I really can not allow users to create their own materials for many good reasons. One of them being that users, instead of asking for new materials will just create their new ones and I will be excluded from a very important feedback loop.

And what happens when I release the same material that someone has added and they are different?

There is a method in how I create and add materials and I can not trust somebody else to do the same. Over time I believe this will lead to breakdown on many different levels.

The next best thing is I can (in the pipleline) create a hardness slider that will adjust harness withing a range and apply the same internal logic to results.

I WILL look at ways of developing something that will solve your needs. Perhaps something like the Translator cloud solution will work. Where you would request a material and supply your suggested data and I will review it and add it into the loop.

Again, I believe the currently supported tool libraries with custom chiploads and speeds as the better way forward.

Dispute the fact that I am kind of shooting down your idea, believe me, your suggestion is very valuable to me. Things like this often lead to major breakthroughs and developments.

Best regards.

avatar

glennd

February 15, 2017, 5:27 pm

Thanks for your time

I understand
:biggrin:

avatar

glennd

February 16, 2017, 6:43 am

Yes Eldar,

Having the ability to change the Hardness using a slider would be nice for all your materials.

Then I will assume that when you adjust the Hardness Slider that the SFPMs will automatically adjust
accordingly.

This will take care of what I am asking for.

other then this, we are stuck with what you are setting for the hardness on any one material.

Thanks Glenn

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here