Subscribe to Blog
Email Address
 

Here are some Okuma Captain 1200 program samples for work with live tooling.
Samples are quite big so READ full article

Code:SIDE DRILLING
O1
(12607T020-AAAN PART BEGIN)
G50 S2000
N300 G0 X100. Y50.
M110
NAT10
G94 M146 M8
G17
M0
(T10-28 .150 DRL SIDE TOP )
G0 X10.838 T1028 SB=3000
M13
G0 X10.838 Z-0.375
G0 X10.838 Z-0.375 C0
C0
G101 X9.138 F200.0
G183 X7.2172 Z-0.375 I0.15 L0.125 C0 D0.125 F12.0
G180
G0 X10.838
C30.
G101 X9.138 F200.0
G183 X7.2172 Z-0.375 I0.15 L0.125 C30. D0.125 F12.0
G180
G0 X10.838
C60.
G101 X9.138 F200.0
G183 X7.2172 Z-0.375 I0.15 L0.125 C60. D0.125 F12.0
G180
G0 X10.838
C90.
G101 X9.138 F200.0
G183 X7.2172 Z-0.375 I0.15 L0.125 C90. D0.125 F12.0
G180
G0 X10.838
C120.
G101 X9.138 F200.0
G183 X7.2172 Z-0.375 I0.15 L0.125 C120. D0.125 F12.0
G180
G0 X10.838
C150.
G101 X9.138 F200.0
G183 X7.2172 Z-0.375 I0.15 L0.125 C150. D0.125 F12.0
G180
G0 X10.838
C180.
G101 X9.138 F200.0
G183 X7.2172 Z-0.375 I0.15 L0.125 C180. D0.125 F12.0
G180
G0 X10.838
C210.
G101 X9.138 F200.0
G183 X7.2172 Z-0.375 I0.15 L0.125 C210. D0.125 F12.0
G180
G0 X10.838
C240.
G101 X9.138 F200.0
G183 X7.2172 Z-0.375 I0.15 L0.125 C240. D0.125 F12.0
G180
G0 X10.838
C270.
G101 X9.138 F200.0
G183 X7.2172 Z-0.375 I0.15 L0.125 C270. D0.125 F12.0
G180
G0 X10.838
C300.
G101 X9.138 F200.0
G183 X7.2172 Z-0.375 I0.15 L0.125 C300. D0.125 F12.0
G180
G0 X10.838
C330.
G101 X9.138 F200.0
G183 X7.2172 Z-0.375 I0.15 L0.125 C330. D0.125 F12.0
G180
G0 X10.838
G0 X10.838 Z-0.375 C330.
M146
G136
G95 M12 M9
M109
G0 X100. Z50.
M1
TLID
(12607T020-AAAN PART END)
M2

Code:FACE DRILLING SAMPLE
O1
(INCAAG PART BEGIN)
N200 G0 X50. Z50.
G50 S2000
NAT09
M110
G94 M146 M8
G17
M0
(T9-15 #7 DRL MTN HOLES)
G0 Z1. T0915 SB=3000
M13
G137 C0
G0 X0.0001 Y0
Z1.
G0 X0.4688 Y0.8119
G0 X0.4688 Y0.8119
G0 X0.4688 Y0.8119 Z1.
G101 Z-0.225 F200.0
G183 X0.4688 Y0.8119 Z-0.8354 K0.1 L0.125 D0.125 F26.0
G180
G0 Z1.
G0 X-0.4688 Y-0.8119
G101 Z-0.225 F200.0
G183 X-0.4688 Y-0.8119 Z-0.8354 K0.1 L0.125 D0.125 F26.0
G180
G0 Z1.
G0 X-0.4688 Y-0.8119
G0 X0.0001 Y0
M146
G136
G95 M12 M9
M109
G0 X50. Z50.
M1
TLID
(INCAAG PART END)
M2

--Eldar Gerfanov

Comments:

No Comments posted yet, be the first one!

New Comment to: okuma prog samples

Name: *
Security Code:
*
 
© 200908:53:46-2016 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use. You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here