Subscribe to Blog
Email Address
 

G71 X Z A|I B D U H L E F J M Q

  • D=First Depth of Cut
  • U=Finish Depth of Cut
  • J=Number of threads at F
  • X=Target Depth (minor Dia of theread)
  • Z=Coord of end Point
  • A= Angle of thread
  • B= Tool Cut angle
  • H= Difference between major and minor dia of the thread
  • M= Cut pattern
  • M32= Longitudal
  • Q= Number of leads

Code
N24 (T5 OD 60DEG CW THREAD TOOL)
N00 G97 G95 S300 M3
N01 G0 X2.1 Z3.05
N02 M8
N03 G0 X1.2
N04 Z0.1538
N05 X0.7
N06 G1 X0.5 F0.076
N08 G71 X0.4 Z-0.8269 D0.01 U0.003  B29. H0.05 F0.077 M32
N09 G0 X1.2 Z-0.8269
N40 Z3.05
N41 X2.1

Note: Feed mode must be in G95(IPR)

Comments:
No Comments posted yet, be the first one!

New Comment to: Thread Turning on Okuma

Name: *
Solve Capcha:
*
Sing In

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here