avatar

By Mahkie

August 29, 2015, 12:03 pm

Coolant F&S modifiers?

Eldar Gerfanov,

Do you have any recommendations for modifying feeds and speeds with different coolant systems? Obviously there's no percentage modifier that covers all materials, but specifically for the HRSA and Stainless materials how would you modify SFPM and chip thickness based on flood coolant and through coolant?

Thanks,

Mark

Answers:
cant leave messages here
Pages:(1) [1]
avatar

Eldar Gerfanov (Admin)

August 29, 2015, 1:48 pm

Hi,

I am working on adding this feature but as you might have guessed it requires a major re-think of how many things work.

In some cases through coolant will make a world of difference in others- not so much.
I am at a stage of collecting the data required for calculations.

I would guess that 150% speed override is OK for through-spindle coolant when drilling.

All machining is expected to run with OR without flood coolant depending on the tool/work piece material combination.

Please check this article for a short guide on application of coolant in different tool/material/coating combinations: http://hsmadvisor.com/index.php?page=help&shell_id=241&article_id=4431

© 2009-2022 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use.

You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here