Subscribe to Blog
Email Address
 

Pages:(6) [1] 2 3 4 5 6

FSWizard:Online Beta!

June 22, 2017, 4:39 pm by Eldar Gerfanov

The new FSWizard mobile Beta was just released for everybody to try.

This is a test version intended to check compatibility on different computers, mobile devices and browsers.
Some of the features do not yet work. Others work better than in the old version. Basically excercise caution when using it.

The number of materials is still limited to a couple of test peices and will be expanded later.

FSWizard.com is now (perhaps) going to become the new official home of FSWizard Online and Mobile calculator!

You can check it out right now and post your concerns and wishes in the comments below:


FSWizard Build Blog n3

May 9, 2017, 10:48 pm by Eldar Gerfanov

Today was quite productive.

All the remaining milling tool types have been finished.

The last one to complete was Chamfering tool type:

Looking at the HSMAdvisor's tool graphic on the right i realize how useful it is to understand where your tool engagement is.
Especially so for tapered, Ballnose and Chamfering tools.

FSWizard does not yet have that functionality, but i will definitely try to add it in one of the updates after the initial release.


FSWizard Build Blog n2

May 8, 2017, 11:42 pm by Eldar Gerfanov

As you might know after i pulled online FSWizard, I set on a huge task rewriting its code to reflect better on all the great improvements HSMAdvisor has had in the last 4 years

So far I have completed rewriting FSWizard code for all Endmill tool types.

Special attention is being paid to have it produce exactly the same results as its big brother:
 

Do not mind the mobile phone frame around the new FSWizard. It will be available online in your desktop browser as well!

I am going to continue posing here about my progress.
So far it seems I will be publishing a first online alpha version in a few weeks.

Best Regards.


Running HSMAdvisor on Linux

April 17, 2017, 9:56 pm by Eldar Gerfanov

Previously when someone asked me whether HSMAdvisor works on linux or Mac I would steer them towards using VirtualBox or Parallels or some other virtual machine to run HSMAdvisor in the virtual Windows box.

As it turns out it is not always necessary.

Our customer has just managed to successfully run HSMA on Linux using package called Wine.

All he had to do was to use wine in 32 bit mode.

I, personally, did not think it was possible to run an app as complex as HSMAdvisor on linux without any modifications on my side. But i was wrong!

Here is a helpful link if you are running 64 bit version of linux and your Wine refuses to launch HSMAdvisor in 32 bit mode:

https://askubuntu.com/questions/136714/how-to-force-wine-into-acting-like-32-bit-windows-on-64-bit-ubuntu

Reportedly Reference and Geometry tabs do not work. But this is not surprising, since they use Internet Explorer to show the information.

Also pressing ENTER key causes the app to crash.

I am going to install a test Linux system on my workstation in the near future and figure out how to fix those issues and make Non-Windows support more readily available.

On another news.

Having made a new FSWizard App design and right before publishing. I decided to rewrite the whole core almost from scratch.

This was needed to make room for new modules like User Tool Libraries and Machine Profiles.

The work is going ahead at full speed and in due time i will roll our the brand new spanking FSWizard!


HSMAdvisor v1.506 For MasterCAM

March 5, 2017, 10:38 pm by Eldar Gerfanov

I have just uploaded the latest update to HSMAdvisor hook for MasterCam x9 and 2017.
This is a catch-up update to the latest HSMAdvisor improvements.

Additionally i promised few guys a tutorial on how to easily install the hook into MasterCam 2017

So here it is:

Please excuse my lack of artistic prowess.
Hey, You can be ANYTHING but you can not be EVERYTHING

And i am more of a technical guy who, perhaps, lacks the hypnotizing narrating skills of a salesman :)


HSMAdvisor v1.506

February 27, 2017, 1:27 am by Eldar Gerfanov

What is new in this update:

  • Improved Engraving and Chamfering speeds and feeds
  • Improved Deflection calculation for High Feed Endmills
  • Removed annoying "Ding" sound on ENTER key press
  • Some minor bug fixes and cleanup.

There have been lots of new functionality in the program and i am going to release a video showcasing that soon.
Keep an eye out for it!

Best Regards.


HSMAdvisor v1.505

February 17, 2017, 12:07 am by Eldar Gerfanov

What is new and improved in this update:

  • Added Custom Speeds and Feeds Tables selection on the Speeds and Feeds page
    You can now quickly apply custom settings to all tools in one click
  • Materials that have custom Speeds and Feeds specified for them are now highlighted with green color in the drop-down
  • Redesigned Custom Speeds and Feeds module.
    It is now on a separate dialog and is accessible not only through Edit Tool Dialog, but also from Speeds and Feeds page by clicking on "Custom Tables" Edit button.
    Dialog now uses Result "in/mm" setting for displaying default units.
  • Fixed error on adding a Tool Library from Database Actions drop-down
  • Improved layout drawing and resizing speed.
  • Improved cut balancing for End Mills

As usual the latest update can be downloaded over here: http://hsmadvisor.com/?page=HSMAdvisor


Improved FSWizard is coming!

January 23, 2017, 1:41 am by Eldar Gerfanov

Check this out, guys.

Been working on this for the past couple of weeks:

New FSWizard Speeds and Feeds Calc will have not only modern improved design. But latest tools and materials.
Special attention is being paid to have it produce EXACTLY the same results as our HSMAdvisor desktop app.

It is not complete yet, but it is almost there - making it catch up to the latest HSMAdvisor code is a big job.

The new calculator will replace our online calculator as well.....

Yes, you heard that right! You will be able to run exactly the same FSWizard Speed and Feed calc on your mobile phone, desktop and even Windows Mobile.

Heck, it will even work on Mac!

Best of all, it will be published as an update to our existing apps, so our existing customers will not have to buy an upgrade, unlike what some other "Machinist Calculator" has done in the past.

I will keep you posted.

Cheers!


HSMAdvisor status report

January 16, 2017, 10:05 am by Eldar Gerfanov

Hello everybody!

I have not made many blog posts here lately because i have been working a lot on new features and simply did not have much time for anything.
So I decided i'd make a little report on how we are doing and where the project is.

First things first.

I just released an update to HSMAdvisor v1.503

  • Drilling tools now consider Shank Diameter when calculating maximum allowed torque on the tool.
    This will lead to more safety when using, say 1" tool with a 0.5" shank.
  • Thread Milling tools have been immensely improved.
    Shank diameter is now included into the calculations.
    Default Length is now 2.5 diameters
    Improved suggested cutting speeds and feeds

Our Multiple Language Translation Program is chugging along nicely

Several people messaged me about intentions to build translations so far.

At this point we have people working on translations for the following languages:

  • Croatian
  • Serbian
  • Portuguese
  • Perhaps Polish (I see someone uploading translations, but the person have not contacted me about it)

Mobile FSWizard app is due for major improvements

Major visual re-design is under way and we are working on making FSWizard Mobile accessible on more devices in more ways.
It is going to be a fully fledged WEB app, that can be run on any internet-connected device. Even on a desktop.

Integration with HSMAdvisor Machine Profiles and Tool Libraries is also planned.

Perhaps we are going to drop native support for Google Play and iOS stores. I am sick of them charging us 30% for their services.


HSMAdvisor v1.501

November 26, 2016, 12:51 pm by Eldar Gerfanov

Every time we add a tenth to HSMAdvisor version number our users know we are up to something completely new and exciting!

Please welcome HSMAdvisor 1.5

Now with International Language support!

I know this feature might not be as interesting to our English-speaking users, but I believe it is a major milestone in maturity of any application.

I have been semi-secretly working on this feature for the past year or so.

Let me just quickly show you how to switch between languages

  • Download and install HSMAdvisor 1.5 as usual
  • Launch HSMAdvisor and go to Settings->General
  • Find button called "Select Language" and click on it
  • Simply select an available language from the list and click OK
  • You will be offered to shut down HSMAdvisor as you can not right now apply the new language mid-flight.
  • When you launch HSMAdvisor again, the language of the User Interface will be of that you have previously selected

If you do not find your native language in the list, do not get upset!
You can easily create your own translation.The proper process for translating HSMAdvior to other languages is described here: http://hsmadvisor.com/?page=help&shell_id=241&article_id=4883_international-language-support

What is next

  • In the coming months we will introduce tools for creating translations on the fly without the need to use a third-party tool.
  • We will add ability for users to earn their free HSMAdvisor license by participating in translation program.
  • And the main thing...

We will continue our hard work to stay the best software tool for CNC machinists!

By the way here are other changes that were introduced in this update:

  • Fixed typos and improved the look of ToolTip messages
  • Fixed 0 - WOC reset when changing tool type

Best Regards


Pages:(6) [1] 2 3 4 5 6

© 200908:53:46-2016 Eldar Gerfanov. All Rights Reserved.
© 2009 Eldar Gerfanov. Materials on this site are presented as is and are mostly for educational use. You may freely reproduce information presented herein without any consent from me, provided you include link to this site.
In case when i am not the copyright holder, you may want to contact proper owner of material. Anyway, they are freely available on the Internet.
If you hold the copyright right for any of the materials on this site and want them removed, please contact me here